- These LOTO units have been designed to lockout electrical panel buttons and switches with no inbuilt lockout provisions.
- Available in various different designs, they all work in a 2-stage operation. The base plate should be attached directly onto the electrical panel over the top of the relevant switch using the super strong adhesive Backing / Riveting / Bolting.
- When in place, the electrical plugs / switches / buttons can be isolated by placing the house unit over the top of base plate – hence preventing the access to the isolated switch. Then, they can be locked in place with a Lockout Padlock.
- The circular units are designed to fit over most of the universal type push / mushroom panel buttons and the square units are designed for the switches with levers. For the switches with extended handles – we have the special patented lockout solutions that freeze the movement of these switches to a still position where they need to be locked at a specific angle.
- This complete range of products can be cut from any side / direction to suit the installation on different panels with varied wiring / attachments to the switches / conduits, levers protruding out or of different shapes.
Manufactured from sturdy special grade transparent material, each unit has been developed to completely enclose electrical plugs to prevent machines from being energized. The plug completely sits inside the unit.
- If more than one unit on a single panel needs to be locked out – we recommend the use of our De Electric Squeezer lockout (ES – SMCL – YB) with the yellow cable being fed through the access holes of these electrical lockouts and locked at one location by multiple users.
- Most appreciated lockout solution for the Oversize Electrical Push Buttons on the electrical panels or on control stations. Also finds its application on the Special crane / heavy machinery.
- This lockout device can be easily installed in seconds – by just placing it on the Push buttons thus concealing them in a cocoon, hence protecting them from being accidently energized.
- The two parts are plugged and then locked out with the help of our lockout padlock.
- Inner size of 70 mm x 85 mm height with 30 mm dia hole in center.
- Safe & effective method for locking out close twin round switches as seen on electrical panels.
- Padlock can be placed for locking / isolating the switches.
- This lockout can be easily installed by just removing the back strip from the double sided super strong backing.
- They are Virtually Transparent.
- 42 x 70 mm inner space.
- Prohibits access to a switch or control.
- Clear bases and cover allow visibility of nameplates and labels.
- Accommodates buttons up to 50 mm diameter and 40 mm tall.
